How to Program Ford Key Fob

Many new Ford owners in Wichita and Derby have some questions about how to program a Ford key fob, so we’re here to help. Programming a new key fob is simple, especially if your car is equipped with keyless entry. At Don Hattan Dealerships, we want to give you every opportunity to enjoy all the perks and amenities of your Ford vehicle. So take a look below to see our guide to Ford key fob programming.

1. Close the car doors, then open the door of the driver’s side. Press the UNLOCK button on the driver-side door. 
2. Turn the ignition from OFF to RUN 8 times. This must be done within 10 seconds, and the 8th time must end on RUN. When you enter programming mode, the door locks will lock and unlock. 
3. Press any button on the Ford remote to be programmed. This step needs to be done within 8 seconds. The door locks will cycle again to confirm the keyless entry remote is programmed and ready to use. 
4. Do you need to program another key fob? If so, press any button on the remote within 8 seconds to cycle the door locks. Simply repeat this step for each additional key fob that you have. 
5. Finally, turn the ignition to OFF. The locks will again cycle to confirm programming is complete. 

Are you also wondering how to turn off Ford MyKey? For this to happen, you must start the vehicle with the main admin key or admin key fob. Then, all you have to do is follow these steps:

• Start your vehicle and allow your computer and screen to turn on.
• On your steering wheel-mounted controls, press the left arrow button to navigate to the main menu.
• On the main menu, press “Settings” after selecting “OK.”
• Once you’re at the “Settings” screen, scroll until you find the “MyKey” option. Press “OK.”
• Under “MyKey,” select “Clear MyKey.”
• After selecting “Clear MyKey,” press and hold “OK” until the “All MyKeys Cleared” message appears.

We know that sometimes things don’t go as planned, so if you still have questions or concerns about your Ford key fob programming, don’t hesitate to reach out, and we’ll be more than happy to help walk you through it. Or you can bring your Ford into our service center near Andover for quality service.